深圳市海凌科电子有限公司
Shenzhen Hi-Link Electronic Co.,Ltd
Http://www.hlktech.com
Tel:0755-36989385 Fax:
0755-83575189
48/49
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure
compliance.
Note 1:
This module certified that complies with RF exposure requirement under mobile or fixed condition, this
module is to be installed only in mobile or fixed applications.
A mobile device is defined as a transmitting device designed to be used in other than fixed locations
and to generally be used in such a way that a separation distance of at least 20 centimeters is
normally maintained between the transmitter's radiating structure(s) and the body of the user or
nearby persons. Transmitting devices designed to be used by consumers or workers that can be
easily re-located, such as wireless devices associated with a personal computer, are considered to be
mobile devices if they meet the 20 centimeter separation requirement.
A fixed device is defined as a device is physically secured at one location and is not able to be
easily moved to another location.
Note 2:
Any modifications made to the module will void the Grant of Certification, this module is
limited to OEM installation only and must not be sold to end-users, end-user has no manual
instructions to remove or install the device, only software or operating procedure shall be placed in
the end-user operating manual of final products.
Note 3:
Additional testing and certification may be necessary when multiple modules are used.
Note 4:
The module may be operated only with the antenna with which it is authorized. Any
antenna that is of the same type and of equal or less directional gain as an antenna that is authorized
with the intentional radiator may be marketed with, and used with, that intentional radiator.
Note 5:
To ensure compliance with all non-transmitter functions the host manufacturer is
responsible for ensuring compliance with the module(s) installed and fully operational. For example,
if a host was previously authorized as an unintentional radiator under the Declaration of Conformity
procedure without a transmitter certified module and a module is added, the host manufacturer is
