深圳市海凌科电子有限公司
Shenzhen Hi-Link Electronic Co.,Ltd
Http://www.hlktech.com
Tel:0755-36989385 Fax:
0755-83575189
18/49
5.3
Commit changers
Click on the Apply configuration of the current page submission. If the network
parameters have been changed, the submission process may require about 25 seconds.
If only modify the serial port function configuration, the submission process will
finished soon.
Click cancel to reload the page, the modified configuration will be lost/
6
Serial AT command configuration
6.1
Enter AT command mode
6.2
AT command
In AT mode, the configuration parameters of the system can be done through the
serial port AT instruction. The command as follows：
at+[command]=[value]\r
According to the different command module will return different value.For
example：”at+remoteip=192.168.11.133\r”Set the ipaddress is 192.168.11.133。
Foe example ：”at+remoteip=？\r”check the remote ip address.
Command list is as following：
netmode
Network model
wifi_conf
WiFi configuration
Channel
WiFi channel
dhcpc
DHCP Client configuration
net_ip
Network IP address
net_dns
Network DNS address
dhcpd
DHCP server configuration
dhcpd_ip
DHCP server IP address
dhcpd_dns
DHCP server DNS address
dhcpd_time
DHCP server allocates time
net_commit
Submit network configuration
out_trans
Exit transmission
remoteip
Remote server domain name or address
remoteport
Local or remote port number
remotepro
Network protocol type
