深圳市海凌科电子有限公司
Shenzhen Hi-Link Electronic Co.,Ltd
Http://www.hlktech.com
Tel:0755-36989385 Fax:
0755-83575189
43/49
Picture 18.
Serial configuration tool
7.4
User data retention
The user parameter save area provides the ability to save parameters. By this
function, you can save up to 4 groups of parameters, user0, user1, user2, user3.,
and click the S button next to them, which pops up the confirmation box, as shown
below：
Picture19. Serial configuration tool to save
clicked"yes" button , the instruction of the AT instruction area to be sent will
be saved as the user0 parameter group. After any click on the user0, the user0
parameter group will be called immediately and the AT command area to be sent will
be covered
The saved user parameters are stored as text files in the tools directory. The
filenames are user0, user1, user2, user3.
7.5
Inquiry configuration
Click the query button configuration tool, immediately to send a series of commands
AT configuration module query module current, AT instruction execution results
immediately executed in the AT command returns the information display area, each
configuration item will return along with the corresponding change information.
7.6
Enter transparent transmission
Assuming that the module is already under the AT command, you can enter the
transmission mode immediately by clicking on the transmission mode button。
7.7
Factory reset
click the factory settings button,as shown below：
