Operating Instruction Manual:
OM-TWS-N-01
Serial Numbers:
All
6
This tool is
NOT
insulated against electric shock. When using this tool with a pump that has an
electrical power source or circuits, follow the pump instructions for proper grounding.
Failure to observe and obey the following safety precautions could result
in property damage, equipment damage or minor / moderate personal
injury;
ALWAYS
wear appropriate personal protective equipment (PPE) when carrying out maintenance
on this tool.
When connecting hoses that have not been pre-filled with hydraulic oil, make certain the pump
reservoir is not drained of oil during start-up.
ONLY
use impact sockets and accessories.
DO NOT
use hand (chrome) sockets or accessories.
ONLY
use Hi-Force recommended accessories.
ONLY
use sockets and accessories that correctly fit the nut / bolt and function without tilting the tool
off the axis of the bolt.
DO NOT
interchange the male and female swivel inlets on the tool or the connections on one end
of the hose. Reversing the inlets will reverse the power stroke cycle and may damage the tool.
To protect your warranty, only use the hydraulic oil grade specified in Section 8.1.
3.0 Declaration of Incorporation / Conformity
Hi-Force declares that this product has been tested and complies with the standards set out in
2006/42/EC - The Machinery Directive. The Declaration of Incorporation/Conformity is included
as Annex A to this instruction document and is supplied with all shipments of this product.
