HGST SA-7000 Скачать руководство пользователя страница 10

Страница: 10 / 109

FRU Replacement Guide

1 About this Guide

1.3 Admonitions

Type

Usage

Note:

Indicates extra information that has no specific hazardous or damaging

consequences.

Tip:

Indicates a faster or more efficient way to do something.

Caution:

Indicates an action that, if taken or avoided, may result in hazardous or damaging

consequences.

Warning:

Indicates an action that, if taken or avoided, may result in data loss or

unavailability.

1.4 Related Documents

For more information about the Active Archive System, please consult the following documents:
• The

HGST Active Archive System Administration Guide

explains how to use the Active Archive System interfaces

for executing system management, monitoring, and analytics tasks.

• The

HGST Active Archive System API Guide

provides a reference for the Active Archive System S3 API.

• The

HGST Active Archive System FRU Replacement Guide

provides procedures for replacing hardware components

of the Active Archive System.

• The

HGST Active Archive System Installation Guide

provides instructions for the installation of the Active Archive

System in the data center, and its initial bringup.

• The

HGST Active Archive System Release Notes

provide important information about changes, new features, and

known limitations.

• The

HGST Active Archive System Site Requirements Document

contains data center requirements for the Active

Archive System.

• The

HGST Active Archive System Troubleshooting Guide

provides help for issues you might encounter.

• The

HGST Active Archive System Upgrade Guide

provides instructions for software and firmware updates, and

system expansion.

For the latest or online version of any of these documents, visit

http://www.hgst.com/support

1.5 Weight

Rack

The following table displays the weight of the Active Archive System:

Hardware

Dimensions (Width x Height x Depth)

Active Archive System

2,250 lbs.
1,020 kg.

Table 1: Active Archive System Weight

Note:

The weight mentioned previous is the total unpacked weight after delivery.

Содержание SA-7000














































































































Результаты поиска

Содержание SA-7000

Отзывы:

Бренды по названию

Популярные бренды

HGST SA-7000, Руководство по замене

Результаты поиска

Содержание SA-7000

Отзывы:

Бренды по названию

Популярные бренды