HF Protoss-PE11, Руководство пользователя

Страница: 9 / 15

Protoss-PE11 User Manual
http://www.hi-flying.com - 9 -
2.1. Protoss-PE11 Pins Definition
Figure 2. Protoss-PE11 Interface
Table2. Protoss-PE11-H Interface Definition
Pin Description Net Name Signal Type Comment
1 AC Power Input L Power
100
～
240VAC Input
2 AC Power Input N Power
5 RS485_B- IO
RS485 B-
6 Signal GND GND Power
Used for RS485 GND, usually leave it
unconnected
7 IO
RS485 A+
RJ45 Ethernet RJ45 I/O
Reload
Restore to factory
setting button
Reload I
Press down for more than 3 seconds and
loose to restore factory setting.
Reset Reset button Reset I
Hardware reset button
Net
Network status
LED
Net O
On: Ethernet connection is OK
Off: No Ethernet connection
Active
UART Data
Transfer
Active O
Off: No data transfer
0.3s Off -> 0.9s On: UART TX Output
0.3s Off -> 0.3s On: UART RX Receive
On: UART bidirection.
Power Power LED Power O
On: Power input OK
Off: Power input NG.
Link
Server
connection LED
Link O
On: netp Socket connection OK.
Off: no netp Socket connection.