HeyCafe HC-598, Руководство пользователя

Страница: 7 / 16

7
© HeyCafé Co., Ltd.
Version 5.0, June 2017
While on grinding state, never let the grinder run un-attendant in order to avoid over filling of the dispenser
which may cause powders’ flow blockage inside the grinding house.
Fig 5.1A
T Model (Semi-Automatic operation):

The appliance is equipped with a 5 minute timer.

Switch ON the appliance by turning the timer knob clockwise to the desired time of operation.

The appliance will switch OFF automatically when the preset time is over, alternatively it can be switched OFF
by turning the timer knob all the way counterclockwise manually.
Remark: full dispenser capacity is 250gr. In normal operation it will take about 2 minutes to completely fill the
dispenser from empty. Never grind to over-fill the dispenser.
AD Model (Automatic operation)

The appliance is equipped with a 3- state main switch: OFF, ON, RUN . (Fig 5.1B)
Fig 5.1B

There are two possible ways to operate the grinder:
o
Grinding limited quantities : In order to start grinding turn the main switch knob clockwise from OFF
position to ON position, then toggle to RUN position and release (the knob will return by itself to ON
position). The grinder will start running. In order to stop the grinder, turn the main switch knob back
(counterclockwise) to OFF position.
o
Automatic grinding mode: To start the grinding operation repeat same procedure as described in
previous clause. Keep the grinder’s main-switch in ON position. The grinder will grind coffee beans
until the coffee grind in the dispenser will reach the full level. Once the coffee powders’ level inside
the dispenser reached its full level the grinder will stop grinding. The grinder will keep resting until
the powder’s level is low
and also few portions of coffee were disposed. Then the grinder will resume
grinding automatically until powders’ level is reaching its full level again. In order to shut off the
grinding operation turn main switch knob into the OFF position.

On Automatic grinding mode, always make sure to have sufficient amount of coffee beans inside the beans
hopper to avoid grinder’s empty-running which may resulting possible over-heating.

The Automatic model is designed for automatic operations; if you are intending to grind only limited
quantities don’t keep the switch on “ON” position. As this may result undesired operation of the grinder.