HeyCafe HC-598, Руководство пользователя

Страница: 6 / 16

6
© HeyCafé Co., Ltd.
Version 5.0, June 2017

Install the beans hopper firmly into its position on top of the body inside the top grindstone holder.

Fasten the hopper to the appliance body by means of the supplied 2mm Allen screw and key. (fig.4.5) Make
sure that the screw is inserted completely through the back hole on the hopper’s crown.
Fig4.5

The TITAN II is equipped with a safety switch (figure 4.2) that is preventing the possibility to operate the
grinder without the beans hopper is fully inserted and secured to its position.

Never bypass the safety-switch or insert foreign objects into the safety-hole to imitate hopper’s crown pin.

Never try to operate the grinder if the beans’ hopper is not fully secured in its position.

Before plugging in the electrical cord, make sure:
o
The appliance voltage and frequency rating (according to the bottom cover label) is the same as the
supply mains.
o
The wall socket is fitted with an efficient ground contact. DONOT plug the appliance into the supply
mains if the ground system was not positively checked to be in compliance with current safety rules.

IT IS COMPULSORY TO EARTH THE APPLIANCE . The manufacturer can not be held responsible in the event
that this regulation is not complied with.
o
The power/current consumption of the appliance (according to the backside label) is consistent with
the capacity of the relevant main socket.
o
The main socket is protected against short outs and power surges.
o
Do not use extension cables, plug adapters for multiple sockets, or make shift connections.

Plug in the appliance.

Upon first time operation, and before placing beans in to the hopper, VISUALLY check that the grindstone
rotation direction is
clockwise
by switching the appliance ON for a few seconds.

Should the rotation direction be wrong, do not use the appliance and contact your local dealer for further
instructions.
5) OPERATION
Grinding coffee with Titan II grinder:
S Model (Manual):
The appliance is equipped with a 3 state operational switch ON-OFF-ON. (Fig 5.1A).
Switch ON the appliance by turning the timer knob either clockwise or counter clockwise from Off position to ON
position.
Switch OFF the appliance by turning the knob back to point the OFF sign.