Heybike Race 26, Руководство пользователя

Страница: 9 / 19

Remove the rubber cover on the charging port on the right side of the ba�ery.
Before using the electric bike, you must fully charge the ba�ery.
Charging
Port
Tail lights
Ensure the ba�ery is off, by inspec�ng the power switch markings.
Plug the charger into the ba�ery’s charging port. With the ba�ery on or off the bike, place the charger in a flat,
secure place, and connect the DC output plug from the charger to the charging port on the side of the ba�ery.
3.
4.
2.
1.
Plug the charger into a power outlet, charging should ini�ate and will be indicated by the LED charge status
lights on the charger turning red. Once fully charged, the charging indicator light turning green. unplug the
charger from the wall outlet first and then remove the charger output plug from the ba�ery charging port.
Charge Your E-Bike
Remove the ba�ery
Ensure the ba�ery is off. Align the key port with the
appropriate off posi�on by inser�ng the key into the
keyport and rota�ng to align the key with the off icons
For your convenience, the heybike ba�ery can be removed
When the Ba�ery is Removed, be careful not to drop or damage the ba�ery when loose from the bike. Avoid
damaging the exposed connector terminals and keep them clear of debris.
When Installing the Ba�ery. Ensure the ba�ery is turned off before sliding the ba�ery into the frame mount
receptacle. Do not force the ba�ery onto the receptacle; slowly align and push the ba�ery down into the
receptacle. Ensure the ba�ery has been properly secured to the bike before each use by carefully pulling
upwards on the ba�ery with both hands to test the security of the a�achment of the ba�ery to the mount.
Carefully slide the ba�ery upwards and li� it off the
frame. Note: the ba�ery weighs around 8 lbs and
should be handled with care.
14 15
Charging Port