Heybike Race 26, Руководство пользователя

Страница: 6 / 19

Assembly
Move the seat up and down by sliding the seatpost
in or out of the seat tube. DO NOT raise the seatpost
beyond the minimum inser�on marking etched into the
seatpost tube
Open the quick release lever by swinging the
lever open and outward fully.
Adujst the seat and the head of the seat is
parallel with the top tube.
Close the quick release lever using your palm or finger.
To determine the right seat height, sit on the eBike with one pedal at its lowest point andplace the ball of your
foot on the pedal. Your leg should be almost fully extended(not locked out) with a slight bend at the knee.
For be�er pedaling, safety and overall riding comfort, posi�oning the seat at the right height is important.
The rider's leg length is used to determine the seat's posi�on. When you pedal, your hips should remain
level and your legs should be almost fully extended at the bo�om of the pedal stroke, but not over-extended.
Adjus �ng the Seat Pos i� on and Angle
To change the angle and horizontal posi � on of the seat:
(1) Use a 6 mm Allen wrench to loosen the seat
adjustment bolt on the clamp posi � oned
immediately underneath the seat , ab ove the
rear wheel.
Do not remove the bolt fully.
(2) Move the seat backward or forward and � lt to
adjust the angle. A seat posi � on horizontal to
flat ground is desirable for most riders. Do not
exceed the limit markings on the seat rai l,
which show the minimum and maximum horizontal movement allowed.
(3) While holding the seat in the desired posi � on , us e a 6 mm Allen wrench to � ghten
theseat angle adjustment bolt securely to the recommended tor q ue value.
Prior to fi rst use, be sure to �g hten the seat clamp via the seat adjustment bolt
properly. A loose seat clamp or seatpost adjustment bolt can cause damage to the
bike, property, loss of control, a fall, serious injury, or death. Regularly check to
make sure that the seat clamp is properly �g htened.
Assembly