manualshive.com logo in svg

Hewland FTR, Инструкции по обслуживанию, Страница: 91 / 93

Поделиться
Скачать
Hewland FTR Скачать руководство пользователя страница 91

PAGE 91 

© Copyright Hewland Engineering Limited 2001-2009

 

FTR Technical Bulletin No. FTR-015 

 

 

Pinion Bearing Nut Revision 

 

Some customers have reported instances of the pinion bearing nut FGA-222-1A coming loose, during 
gearbox operation. In an effort to alleviate the loosening of the locknut, the design has been enhanced, 
increasing its radial thickness, length, and the material specification.  
 
This modification has also enabled us to incorporate the washer HC8-222-2A into the locknut, so making 
the washer redundant. 
 
The latest design of locknut has been re-numbered as NUT-031, and the relevant tightening torque has 
been increased to 150 lbs.ft (205 Nm). 
 
As on the earlier locknut, the outside face is grooved, so leaving a thin section which 

must

 be peened 

over in two positions, into the corresponding grooves machined into the bearings threaded diameter.  
 
The locknut must also be fitted using loctite 2701 thread lock. 
 
If for any reason the locknut is fully fitted (i.e. peened over), and subsequently removed, we would        
recommend that a new locknut be fitted. 
 
N.B. These changes do not apply to Formula BMW applications. 

Содержание FTR






























































































Отзывы:

Нет отзывов