Hewi ES5403, Инструкция по установке, Страница: 8 / 8

HEWI Installation-instruction
M1000_123_ES5403_DE-Vers-001.pdf M1000.123 Page 8 of 8
HEWI P.O. Box 1260 D-34442 Bad Arolsen
Wiring plan:
inputs:
J1.1: input 1
J1.2: input 1
J1.3: input 2
J1.4: input 2
J1.5: power supply
J1.6: power supply
Input 1 needs to be connected. If there is no alarm-device in use, the power supply has to be
connected to input 1.
outputs: Serial interfaces:
J2.1: closer 1 (NO) J3.1: VCC (onyl for seperated reader-module)
J2.2: closer 1 (NO) J3.2: RS485-A (onyl for seperated reader-module)
J2.3: opener 1 (NC) J3.3: RS485-B (onyl for seperated reader-module)
J2.4: opener 1 (NC) J3.4: GND (onyl for seperated reader-module)
J2.5: opener 2 (NC) J3.5: RS485-A (SPS-interface)
J2.6: opener 2 (NC) J3.6: RS485-B (SPS-interface)
Connection basis-unit ES5403 <--> reading-module ES5401:
Basis-unit ES5403 Reading-module ES5401
RS485-A J3.2 2 (socket X1 or X2)
RS485-B J3.3 3 (socket X1 or X2)
VCC J3.1 1 (socket X1 or X2)
GND J3.4 4 (socket X1 or X2)
J1
J2 J3
J4
6 5 4 3 2 1
6 5 4 3 2 1 6 5 4 3 2 1
1 2 3 4 5
Backside view