- 4 -
1.1.
Fastening of elements no 1, no 2 and no 3
.
-
left bottom corner (1) should be placed properly with keeping the distance of 9cm (cross-section B-B),
and put from the bottom under collector` s frame,
-
to prevent protruding and falling of the corner mounted, it should be screwed on using screw with a gas-
ket to the slat which supports collectors in a place indicated on the cross-section A-A,
-
detach the paper which prevents the sticking substance in the right part of the corner (1) and put the
middle element on it (2),
-
in a place of the overlay, again screw on the flashing with a screw to the slat under the collector,
-
analogically mount the element (3)
2.2.
Fastening of elements no 4, no 5, no 6, no 7, no 8.
-
Side element of the flashing (4) should be put on the overlap on built up corner (1) after keeping the dis-
tance of 9cm (cross-section B-B), in the upper part of the collector should be fastened using graspers for
flashing and screws for slate laths,
-
Again, using a rubber rope, fasten side fish-plate (6) in the side trough of the collector,
-
Analogically mount elements on the other side of the battery (5), (7).
Rubber rope
Element no 6
Element no 4
Flashing’s grasper
Screw for wood 3,6
25mm
Collector KS2000
cross-section "B-B"
cross-section "A-A"
10 cm
