Hettich DancerPlus, Руководство по эксплуатации

Страница: 3 / 30

Hettich AG, Seestrasse 204a, 8806 Baech, Switzerland Operator Manual_DancerPlus_EN_rev, 1.1
Page 3
Table of contents
1.0 Purpose and target group 5
1.1 Storage and forwarding 5
1.2 Intended use 5
1.3 Residual risks 5
1.4 Technical data 6
1.5 Scope of delivery 7
1.6 Symbol meanings 7
1.7 Safety information 8
1.8 Operating personnel requirements 9
1.9 Responsibility of the owner 9
1.10 Resistance of the vacuum chamber 10
2.0 Unpacking 11
2.1 Transportation 11
2.2 Device views 12
2.2.1 Front view 12
2.2.2 Rear view 13
2.2.3 View with open lid 14
2.2.4 Left lateral view 15
2.2.5 Vacuum sensor fitting 15
2.2.6 Jumo
®
temperature controller 16
2.2.7 Label (rating plate) 16
2.2.8 Sample racks 17
2.3 Installation 19
2.3.1 Location 19
2.3.2 Operation with inert gas, vacuum pump, cold trap 19
2.3.3 When using a Vacuubrand® diaphragm pump and PoleStar cold trap: 19
2.3.4 When using a Vacuubrand® diaphragm pump without the PoleStar cold trap: 20
2.3.5 When using a Vacuubrand® rotary vane pump and PoleStar cold trap: 20
2.3.6 When using a Vacuubrand® rotary vane pump without the PoleStar cold trap: 20
2.3.7 Installation of the rack and shaking plate 20
2.3.8 Mains inlet device socket and mains switch 21
2.3.9 Lid connection cable 21
2.4 Conduct in the event of faults and irregularities 21
2.5 Emergency switch-off of the DancerPlus 21
3.0 Individual operating functions 22
3.0.1 Release valve 22
3.0.2 Compartment heater 22