HETAS BK132, Руководство по эксплуатации и установке

Страница: 7 / 16

7
INSTALLATION
FIREBOX LINER PANELS
The AX range of stoves use firebox
liner panels to the sides and back. The throat plate
sits on top of the sides and rear panels. These
should come fitted to your stove, if however they
are not, proceed as follows to fit them.
x
Open the fire door.
x
Remove the fuel retainer by lifting free of the
out from the front brace
x
Set the smaller liner into the back of the
firebox.
x
Insert side liner panels. (See Fig. 2)
x
Fit the throat plate with the projecting lugs
sitting on top of the side liners. The long
centre tab on the back edge rests on the
rear liner. The shorter turn down tabs
against the vertical face. (See Fig. 3 & 4)
x
Replace the front fuel retainer.
Note: Neither the rear firebox liners nor the
side firebox liners are ‘handed’, both faces are
suitable for direct contact with the fire bed.
Note : Cracking of the lining panels does not
effect efficiency.
Fig. 5. Overall View Of Liners
& Throat Plate Assembly
Fig. 2. Liners Inserted
Fig. 3. Inserting The Throat Plate
Fig. 4. Liners & Throat Plate
Correctly Fitted