15
Care & Cleaning
Jug and lid
In order to keep your Jug clean and avoid food
drying on the blades and jug, follow the below
steps as soon as possible after use
•
Rinse most of the ingredients off the jug
and lid.
•
500ml of warm water and press the AUTO
CLEAN button. If thick or sticky ingredients
require extra cleaning power add a few drops
of dish liquid detergent.
•
Rinse the jug and lid again and/or wash
separately in warm soapy water with a soft
cloth or bottle brush.
•
It is most effective to clean the jug
immediately after use.
Motor base
To clean the motor base, wipe with a soft, damp
cloth then dry thoroughly. Wipe any excess
food particles from the power cord.
Cleaning agents
Do not use abrasive scouring pads or cleaners
on either the motor base or the jug, as they may
scratch the surface. Use only warm soapy water
with a soft cloth.
Dishwasher
The blender jug and lid can be washed in the
dishwasher on a standard wash cycle. Jug can
be placed on the bottom shelf, however the lid
and inner measuring cap should be washed on
the top shelf only.
Stubborn food stains and odours
Strong smelling foods such as garlic, fish and
some vegetables such as carrots may leave an
odour or stain on the blender jug and lid. To
remove, soak blender jug and lid for 5 minutes
in warm soapy water. Then wash with a mild
detergent and warm water, rinse well and dry
thoroughly. Store jug with the lid off.
Storage
Store your blender upright with the blender
jug assembled on the motor base, or beside it.
Do not place anything on top. To allow air to
circulate, keep the lid off.
