Care & Cleaning
Unplug the power cord from the power outlet
after use for safety reasons.
To keep your cup and lid clean, avoid allowing
food residue to dry on them.
Follow these steps as soon as possible after use:
•
Rinse most of the residue off the blades,
cup and lid.
•
Hand wash in warm, soapy water using a mild
liquid detergent and non-abrasive sponge.
Cleaning agents
Do not use abrasive scouring pads or cleansers
on either the motor base or the cup, as they
may scratch the surface. Use only warm soap
water with a soft cloth.
Pressurisation
The cup may be rinsed by adding cold water,
attaching blades, and either blending or
shaking by hand for 10 seconds.
IMPORTANT: There is a risk of pressurisation
from hot water and/or detergent.
When rinsing by attaching blades and
blending/shaking, never add hot or even
warm water, as the steam produced can create
dangerous pressurisation of steam.
Do not add detergent, as the foam produced
will expand and may cause pressurisation.
Dishwasher
The cup, lid and blade assembly may be
washed in the dishwasher on the top shelf only.
Stubborn food stains and odours
Strong smelling and some vegetables such as
carrots may leave an odour or stain the blades,
cup or lid.
To remove, pour warm soapy water and fill to
the MAX mark. Set aside to soak for 5 minutes.
Then wash with a mild detergent and warm
water, rinse well and dry thoroughly. Store cup
with lid off.
Do not attach blades when washing with
detergent.
Storage
Do not store with the cup turned to the ON
position, as this means the motor is engaged
and will turn on immediately when plugged in
or switched on at the wall.
