ELECTRICAL SHOCK HAZARD
Disconnect power before installing or servicing appliance. Failure to
do so can result in electrical shock or death. It is the responsibility of
the user to have the appliance connected by a licensed electrician in
accordance with all applicable codes and standards, including fire-related
construction. See "ELECTRICAL CONNECTION" for details.
ELECTRICAL SUPPLY AND GROUNDING
• This appliance must be grounded. Grounding reduces the risk of
electric shock in the event of a short circuit. See "INSTALLATION
STEPS" on page 10 for instructions.
• This appliance must be connected to 120 VAC Single Phase, 60 Hz, with a current rating as
shown in the model number listing on page 2.
• OWNER: Have the installer show you where the electric circuit breaker is located so you know
how to shut off the power to this appliance.
When properly cared for, your Hestan Drawer Microwave will provide safe, reliable service for
many years. When using this microwave, basic safety practices must be followed as described in the
following pages.
IMPORTANT: Save these instructions for the local Utility Inspector’s use.
INSTALLER: Please leave these Installation Instructions with the owner.
OWNER: Please read these Instructions and save them for future reference
SAFETY PRECAUTIONS - BEFORE YOU BEGIN
TABLE OF CONTENTS
1
SAFETY PRECAUTIONS - BEFORE YOU BEGIN
2
MODEL NUMBERS
2
RATING LABEL
2
REGULATORY / CODE REQUIREMENTS
2
IMPORTANT NOTES
3
CLEARANCES AND DIMENSIONS
10
INSTALLATION STEPS
GENERAL SAFETY PRECAUTIONS
When properly cared for, your new Drawer Microwave has been designed to be a safe, reliable
appliance. Read all instructions carefully before using it. When using kitchen appliances, basic
safety precautions must be followed.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING:
a) Use this microwave only as intended by the manufacturer. If you have any questions, contact
the manufacturer.
b) Before servicing or cleaning unit, unplug the microwave or switch power off at service panel and
lock the service disconnecting means to prevent power from being switched on accidentally.
If the appliance cannot be unplugged and the service disconnecting means cannot be locked,
securely fasten a prominent warning device, such as a tag, to the service panel.
©2019 Hestan Commercial Corporation
1
EN
