hesotec electrify eSat r20, Инструкция по установке и эксплуатации

Страница: 15 / 28

Installation 12
3.4 Electrical Installation
DANGER !
Safety note on a hazard with electrical voltage
Make sure that the cables are de-energized at the time of installation.
Failure to follow the instructions may result in a risk of death due to elec-
trical voltage.
ATTENTION !
Safety information on a hazard
Failure to follow the instructions may result in damage to the device itself
or other consumers. Execution with special care!
The electrical installation of the charging station may only be carried out by qualified
personnel. When installing the electrical system, make sure that the cables are not damaged
or crushed. These could interfere with the functions in later use, cause defects or even cause
a fire.
The following table shows the connection diagram of the connection point between the
ground side supply line and the charging unit cables including the functional description.
Supply Line Ground
Terminal
Strip
Loading Unit
Color Function Label Color Function
- - LR black
Phase for power sup-
ply / charge controller
brown Phase 1 L1 brown Phase 1
black Phase 2 L2 black Phase 2
grey Phase 3 L3 grey Phase 3
blue Neutral conductor N blue Neutral conductor
green/yellow Protective conductor PE green/yellow Protective conductor
Connection diagram terminal strip electrify eSat r20
NOTE !
Important information and special features
Please take the requirements of the power connection from the technical
data sheet in chapter 2.4.