Herutu TW-510T, Инструкция по эксплуатации

Страница: 18 / 32

12
6.To change the ID setting
6-2.To change the ID setting
Pull out the fixing screw of Transmitter, and disassemble the main body from the
Seat.
Change the ID of Transmitter according to the Display stated in previous page.
Verify that Receiver is set in the same contents as well.
Set the lever of Dip Switch using the sharp edge like Prick punch.
The Dip Switch can be easily damaged. Do not apply an excessive
force during setting.
Test the transmission before assembling to
check that Receiver is consistent with the ID number.
Upon completion of setting, install the Transmitter according to “5-2 Installation”
with an attention being paid not to bite the cord.