Herutu TW-510T, Инструкция по эксплуатации

Страница: 14 / 32

8
5.To install on the Torque wrench
5-2.Installation
1)To install the Seat
-Fix the Seat with four fixing screws.
-For the application with heavy oil mist, fill up the caulking agent between
Wrench seat and Seat and also between Wrench shaft and Wrench seat to protect the
internal board.
Apply the screw locking
agent onto the 2 to 3 threads
of screw edge.
2)For ID setting
-See the next article(6. To change ID
）
.
3)-Fix the Transmitter Limit SW with two hexagon socket head bolts(which was
removed).
-Verify that the moving range of wrench lever is well suited for the movement
range of switch during the wrench in movement.
The hexagon socket head bolt requires a washer.
Apply the screw locking agent on 2 to 3
threads of hexagon socket head bolt.
Wrench lever