Herutu SD-4, Руководство по эксплуатации

Страница: 22 / 48

17
2-2-1 Initial screens
The initial screen 1 is the first screen you see after powering on the machine (see below).
After displayed for 1.5 seconds, the initial screen 1 switches over to the initial screen 2 where
the working hour pattern, operation type, and time are displayed. Alternatively, if it is within
working hours, the initial screen 1 switches over to the standard screen after displayed for
1.5 seconds. Even when it is not within working hours, the
initial screen 1 also switches
over to the standard screen provided the Actual input is present.
When on the standard screen, you can switch to the initial screen 2 by pressing the [+] key.
Press the [+] key again to return to the standard screen.
*1: When the Working hour is set to be not used, the Working hour pattern is disabled, causing
the following display to result:
1. 0
Program version
[Initial screen 1]
1. 1 2 3
Working hour pattern + Operation
type
*1
8. 3 1.
hours./minutes.
5 9
seconds
[Initial screen 2]
1 2 3 4
Target quantity
3 0
Production actual
3
Advancement
[Standard screen]
. 1 2 3
Operation type
8. 3 1.
hours./minutes.
5 9
seconds
[Initial screen 2]
1.5 seconds later
Switches to the standard screen when it is within working hours or
Actual input is present
even when it is not within working hours
.