27
USING THIS MANUAL
WHEN YOU SEE DISPLAY ADVANCE VIA BUTTONS ON THE RIGHT.
1
USING THIS MANUAL :
WHEN YOU SEE DISPLAY ADVANCE VIA BUTTONS ON THE RIGHT.
PRESS SIMULTANEOUSLY TO THE FRAMED BUTTONS.
FIRST PRESS LEFT-HAND SIDE BUTTON SIMULTANEOUSLY PRESS THE OTHER
ONE.
PRESS ONE AFTER ANOTHER
AFTER PRESSING THE MENTIONED BUTTONS, COMPARE THE DISPLAY WITH THE MANUAL
TO VERIFY. SO YOU CAN ADVANCE STEP BY STEP.
ALSO NOT TO CONFUSE STEP NO IS WRITTEN ON THE LEFT SIDE OF THE DISPLAY.
MAINTENANCE COUNTERS
WHEN THE COMPRESSOR IS RUNNING, PUSHING
SHORTLY, THE DISPLAY SHOWS
MAINTENANCE TIMERS.
1
(WORKING PRESSURE)
2
(WORKING TEMPERATURE)
3
HOURS TO THE NEXT AIR FILTER CHANGE.
4
HOURS TO THE NEXT OIL FILTER CHANGE.
5
HOURS TO THE NEXT SEPARATOR CHANGE.
6
HOURS TO THE NEXT OIL CHANGE.
7
CHECK KOMPRESSOR
8
(RUNNING SCREEN)
IF THE NUMBERS TO BE DISPLAYED HAVE MORE THAN THREE (3) DIGITS OR TWO DIGITS
WITH NEGATIVE SIGN (-), THE MULTIPLICATIVE FACTOR LED “X10” OR “X100” EMMITING.
WHEN THE TIMERS ARE OVER, THEY WILL GO ON AS NEGATIVE COUNTING.
(1800 HOURS, SHOWING ON THE SCREEN
AND WITH “X10” LED EMMITING)
IF NO ONE BUTTON IS PUSHED FOR THE NEXT 1 MINUTE, CONTROLLER GOES MAIN
SCREEN AUTOMATICALLY.
WORKING HOUR COUNTERS
WHEN THE COMPRESSOR IS RUNNING, PUSHING
THE DISPLAY SHOWS WORKING
HOURS.
1
(WORKING PRESSURE)
2
(TOTAL HOURS) AND THEN THE TOTAL HOURS VALUE
3
(LOAD HOURS) AND THEN THE LOAD HOURS VALUE
4
(RUNNING SCREEN)
screen
