Herth+Buss ELPARTS CrankPrint 95972081, Руководство по эксплуатации

Страница: 36 / 68

Operating Instruction 95972081
www.herthundbuss.com 36
EN
HEADLIGHTS ON
After eliminating the surface charge, the
message "Turn lights off" is output and the
test can be continued.
TURN LIGHTS OFF
3.4.2 Selecting the battery charge state
After selecting the battery location, the
charge state of the battery must be specified.
Select the status "before charge" if the bat-
tery was not charged within the 2 hours pri-
or to the test, or the status "Geladen" if the
battery was charged shortly before the test.
NOTE
For batteries installed in the
vehicle, select the status "after
charge" if the engine is warm, or
the status "before charge" if the
engine is cold.
SELECT CHARGE
BEFORE CHARGE
SELECT CHARGE
AFTER CHARGE
3.4.3 Selecting the battery type
After selecting the charge state, the battery
type must be specified. Determine the type
of battery installed in the vehicle and select
it as appropriate using the Up and Down but-
tons. Confirm the selection with the OK but-
ton. The following battery types are available
for selection.