Herth+Buss 4026736413040, Руководство по эксплуатации, Страница: 10 / 20

Operating Instruction 95921001
www.herthundbuss.com 10
EN
Do not drop the micro soldering iron.
If dropped, the device may be damaged
and the ceramic may break.
Do not use the product if it has been
dropped or if the device exhibits any
sign of damage.
Do not store at temperatures
above 45 °C, such as in a car or
in intense direct sunlight.
Observe the instructions for filling
in order to prevent serious accidents.
Do not ignite the soldering iron close to
your face, hands, clothing or combustible
materials.
IMPORTANT
Under certain light conditions, the
butane flame may be barely visible.
Before storing, leave the micro soldering
iron to cool down completely.
After every use, ensure that the flame is
extinguished and that the gas supply has
stopped.
Never use the soldering iron as a
cigarette lighter.
Particular caution should be exercised
when using the soldering iron outdoors
on sunny or windy days.
The wind may cause the heat of the sol­
dering iron to be carried in the direction
of the user or into other areas which are
not intended to be heated.
Do not use the soldering iron to remove
lead­based paint indoors or in enclosed
spaces.
Always check that no parts or materials
are unintentionally heated.
If there is a possibility that a certain ma­
terial has been unintentionally heated,
ensure before leaving the area that any
risk of fire/explosion has been precluded.
Take particular care to avoid breathing
in fumes from cadmium coatings and
galvanised metal.
Please be aware that the soldering iron
tip and the accessories will become hot
during use.
Do not point it in a direction which may
cause objects in the vicinity to catch fire
under certain circumstances.
Heating up is extremely dangerous in
these cases, especially after “emptying”.
Always keep a fire extinguisher and wa­
ter bucket close at hand in the vicinity of
the soldering iron and the working area.
Do not cool the soldering iron down
with water; this will cause damage to the
product.
Store and transport the container in an
upright position.
After use, wait until you have ensured
that the soldering iron has extinguished
and completely cooled down. Ensure
that any danger of fire or explosion has
been precluded in the surrounding area.