T-MT Mains powered
wifi thermostat
Display & Buttons
1. Day of week
2. Time
3. Temperature
4. Heating on symbol
5. Adaptive Start function enabled
6. Window Open function enabled
7. Operating Modes
8. Holiday (Away) Days remaining
9. Program number being run
10. Power On / Off
11. SET button
12. PRG Program button
13.
Minus ‘
-
’ button
14.
Plus ‘+’ button
15. Holiday Mode
Operating Instructions
Pairing the T-MT with the Heater
1. Double press the Pairing button on the SMART-R box of the heater. The green
pairing status LED will start to flash and the heater is ready for pairing.
2. Ensure power is available to the T-MT, but that the power button on the unit is
switched off.
“OF”
is shown on the display.
3. Long-press the SET button on the T-MT and the word
“PAIR”
will flash on the
display.
4. When pairing has completed successfully, the green pairing status LED on the
SMART-R box will become a steady green and the word
“PAIR”
on the T-MT will
disappear.
5. You should not experience any difficulty in pairing, but in case you do, please
ensure the T-MT and Heater are within range of each other and try the above
process again.
6. Press the Power button on the T-MT to start using it to control the heater.
