Installation Guide for Herschel Inspire Units
Assembly Kit
Please check the enclosed assembly kit consists of: 2x fixings brackets, 8x screws, 8x rawlplugs
Step 1
Mark the eight drilling holes on to the intended installation site
Step 2
Drill holes in to the installation site on the marked places and then place the wall plugs in to the drilling holes.
Step 3
To fix the included fixing brackets to the installation site
turn the screws in as far as possible through the grooves of
the fixing brackets in to the wall plugs. (see fig 1).
Step 4
Before placing your Herschel far infrared heater panel on to
the fixing brackets please check that the four distance
pieces on the rear of the far infrared heater panel are
screwed in as far as possible.
Step 5
Now fit the far infrared heater panel on to the two wall
holders (see fig 2).
If ceiling mounting please use the narrower slide-in channel.
Step 6
Unscrew the four distance pieces on the rear of the far
infrared heater panel so that the panel is fixed securely to
the wall or ceiling and cannot be removed.
Step 7
Please check that your Herschel far infrared heater panel cannot be removed from the wall.
Removal
Screw the four distance pieces so that your Herschel far infrared heater panel can be removed from the fixing
brackets and taken down from the installation site.
PANELS COVERED BY THESE INSTRUCTIONS:
Standard White Panels:
CL-200
CL-300
CL-400
CL-500
CL-750
CL-750L
CL-900
CL-1200
CL-1200L
Mirror Panels:
SH-200
SH-300
SH-400
SH-500
SH-750
SH-900
SH-1200L
Picture Panels:
BH-200
BH-300
BH-400
BH-500
BH-750
BH-900
BH-1200
Coloured Glass Panels:
GH-300
GH-500
GH-750
GH-900
