HERON 8896140, Перевод оригинального руководства пользователя

Страница: 118 / 138

118
EN
III. Parts and control elements
Fig. 1, position-description
1) 230V/16A power sockets
2) Circuit breaker for 230V/16 A power sockets
3) Circuit breaker for 12V/8.3 A DC power sockets
4) 12V/8.3A DC socket for charging car batteries
5) Engine switch
6) Indicator of voltage (V), frequency (Hz),
motor hours counter (H)
7) Rating label
8) Grounding terminal
Fig.2, position-description
1) Indicator of voltage (V), frequency (Hz),
motor hours counter (H)
2) 230V/16A power sockets
3) Circuit breaker for 230 V power sockets
4) 230V/32A power socket
5) Grounding terminal
6) 12V/8.3A DC socket for charging car batteries
7) Circuit breaker for 12V/8.3 A DC power sockets
8) Rating label
9) Engine switch
Fig. 3, position-description
1) Indicator of voltage (V), frequency (Hz),
motor hours counter (H)
2) 230V/16A power socket
3) 230V/32A power socket
4) 400V power socket
5) Grounding terminal
6) Circuit breaker for 400 V power socket
7) Circuit breaker for 230 V power sockets
8) 12V/8.3A DC socket for charging car batteries
9) Circuit breaker for 12V/8.3 A DC power sockets
10) Rating label
11) Toggle switch between 230 V and 400 V power socket
12) Engine switch
Fig.4, position-description
1) Folding handle with vertical position lock
for handling the generator.
2) Petrol level in tank indicator
3) Petrol tank
4) Release pin for folding down the handle
5) Petrol tank cap
Fig.5, position-description
1) Folding handle with vertical position lock
for handling the generator.
2) Petrol tank
3) Release pin for folding down the handle
4) Petrol level in tank indicator
5) Petrol tank cap
Fig.6, position-description
1) Air filter cover
2) Air filter cover fixtures
3) Choke lever
4) Fuel valve (fuel supply shut-off to carburettor)
5) Pull starter handle
6) Rubber wheel
Fig.7, position-description
1) Alternator cover
2) Exhaust pipe
Fig. 8, position, description
1) Spark plug connector
2) Carburettor
3) Carburettor purge bolt
4) Support foot with rubber pads
Fig. 9, position, description
1) Spark plug connector
2) Carburettor
3) Carburettor purge bolt
4) Support foot with rubber pads
5) Exhaust pipe
Fig.10, position-description
1) Oil sensor
2) Year and month of manufacture
and production batch number
3) Bolt for draining oil from the crankcase
4) Oil tank cap
5) Battery
6) Battery cable connection terminals