HERKULES L1200S, Руководство пользователя

Страница: 5 / 15

Locate lift on a level surface in a position most convenient for the loading and unloading of vehicles.
Obtain hose clamps
ID
Part # Description Qty.
1 720-122 CLAMP HOSE # 4 SS/Z 1
2 1001942 CLAMP HOSE CRIMP TYPE 1" Z 1
Using the 1" hose clamp (1001942), clamp the 5/8" ID air line (1001274) from the lift to 5/8" hose barb (1001393) on the
foot control assembly (see fig.1).
Using the #4 hose clamp (720-122), clamp the 1/4" ID air line (720-106) from the lift to hose barb (990) on the foot
control assembly (see fig.1).
NOTE: Check these connections periodically to prevent leakage.
Obtain 1/2 NPT connector compatible with the quick disconnect on your shop air line.
NOTE: Connector not supplied with lift.
Install 1/2 NPT connector into open port (Port 1) on the foot control valve (see fig.2).
Connect your shop air line to connector and test for proper operation.
NOTE: Must use clean, dry air only. Herkules recommends using a filter/regulator (see Optional Accessories).
Installation
STEP 1
STEP 2
STEP 3
STEP 5
STEP 6
STEP 7
STEP 4
fig.2 fig.1
5/8" Hose barb
1001393
1/4" Hose barb
990
Port 1
Page 5 of 15