Hercules Robert/a F7 Series, Руководство по эксплуатации

Страница: 51 / 108

034-11401_1.0_24.08.2017
49
Transportation, storage and assembly
 Every bicycle must be prepared so that it is in fully
usable condition immediately after being set up.
Initial commissioning includes the following work:

Check the battery [

Chapter 5.6.3.1, page 50 ].
 The battery is supplied partially charged. In order to
guarantee full power, charge the battery fully.
 Install the wheel and the pedals .

Move the handlebars and saddle into the functional
position.

Check all the components to make sure that they
are firmly in place.

Check all the settings and the tightening torque of
the axle nuts.
 Check the entire cable harness to make sure that it
is routed properly:
• You must prevent the cable harness from coming into
contact with moving parts.
• The cable routes must be smooth and free from sharp
edges.
• Moving parts must not apply any pressure or tension
to the cable harness.
 Set the lamp .

Check the drive system, the light equipment and
the brakes to make sure that they are fully
functional and effective.
 Set the drive system has to the national language
and the appropriate system of measurement.
 Check the software version of the drive system and
update it as necessary.
Axle nut tightening torque 35 Nm - 40 Nm