Hercules Robert/a F7 Series Скачать руководство пользователя страница 47

Страница: 47 / 108

034-11401_1.0_24.08.2017

Transportation, storage and assembly

5.2

Storing



Store the bicycle, battery and charger in a dry and
clean place.

5.2.1

Break in operation

Risk of fire and explosion due to high temperatures

Excessively high temperatures damage the batteries.
The batteries may self-ignite and explode.



Never expose the battery to sustained direct
sunlight.

If the bicycle is lying flat, oil and grease may leak from
the bicycle.

If the shipping carton with a bicycle is lying flat or on
one end, it does not provide sufficient protection from
damage to the

frame

and the wheels.



Only store the bicycle in an upright position.

CAUTION

NOTICE

Storage temperature

5 °C - 25 °C

Ideal storage temperature

10 °C - 15 °C

Table 27: Storage temperature for the battery, the bicycle and the charger

The battery discharges when it is not used. This can
cause damage to the battery.



The battery has to be recharged every 8 weeks.

The battery may become damaged if it is connected
permanently to the charger.



Do not connect the battery to the charger
permanently.

NOTICE

Содержание Robert/a F7 Series













































































































Результаты поиска

Содержание Robert/a F7 Series

Отзывы:

Hercules Robert/a F7 Series, Руководство по эксплуатации, Страница: 47 / 108

Результаты поиска

Содержание Robert/a F7 Series

Отзывы: