21.85m(L)x13.85m(W)x6m(H) Star Marquee Instruction Manual www.herculesgazebo.co.nz [email protected] 0800 810 910
POLE SPIGOT BASE PLACEMENT
The pole spigot bases(E) are drilled into the ground by using a sledge hammer, and 5.85.m apart. A small block timber must be used to reduce
the likely damage to the spigot top by the hammer. Using your spray marking paint and tap measure marking an 8m straight line, using small
dots on the ground, either side of pole spigot bases, also mark out the full length of the marquee.
Use the supplied triangle peg placement template mark out the position of each peg. It
’s important that the template steps(Figure 02) to follow to
identify correct peg placement, failed to follow these steps will result in your marquee not sitting in the correct position and may cause damage to
the marquee.
