MY21H02 - 12_1.0_19.10.2020
86
Troubleshooting, fault clearance and repair
9.1.7
Other errors
Symptom
Cause
Remedy
Two beeps will sound if a
switch is pressed but the
switch cannot be oper-
ated.
Pressed switch mode has been deacti-
vated.
This is not a malfunction.
Three beeps are
sounded.
A fault or warning has occurred.
This occurs when a warning or an error is shown on the
display screen. Follow the instructions for the code indicated
on screen in Section 6.2 System Messages.
When you use an elec-
tronic gear shift, you can
feel that pedal assistance
becomes weaker when
the gear is changed.
This is because the computer sets the
pedal assistance to the optimum level.
This is not a malfunction.
A noise can be heard
after switching.
Contact your specialist dealer.
It is normal to hear a
noise coming from the
rear wheel when cycling
as normal.
The gear shift setting may not have
been made properly.
Contact your specialist dealer.
If you stop the pedelec,
gear transmission does
not switch to the position
pre-configured in the
functional feature.
You may have applied too much pres-
sure onto the pedals.
It is easier to change gears if you press onto the pedals gently.
Table 39: Error solution for battery
