Hercules 21-Q-0023, Перевод оригинальной инструкции по эксплуатации

Страница: 42 / 109

MY21H02 - 12_1.0_19.10.2020
42
Operation
73 The difference in
torque between two
measurements
exceeds the permitted
value (± 166)
1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
74 RAM test failed 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
75 Invalid pedal sensor
signal detected
1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
76 12 V out excess
current
1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
80 No offset angle
calibration carried out
(EOL)
1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
81 No interruption in the
speed sensor detected
1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
82 ROM test failed 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
83 Stack test failed 1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
84 No serial number
detected
1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
85 Accelerator handle
CAN timeout message
detected.

Check cables and
connectors on all the
electric drive system
components.
86 Accelerator handle
voltage outside the
permitted range
([0.5 V ... 4.2 V])
1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
87 Accelerator handle has
not yet reached off
position (torque
requirement: zero)
(~0.5 V)
1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
Code Description Method of resolution
Table 27: List of display screen error messages
90 Error detected in the
program start-up.
1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
91
92
93
The torque sensor has
transmitted incorrect
data
1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
94 The high-side drive
has detected an error
(excess current or
temperature)
1 Re-start the system.
2 Contact your specialist
dealer if the problem
persists.
95 Brake light current
detected (>0.3 A)

Check cables and
connectors on all the
electric drive system
components.
Code Description Method of resolution
Table 27: List of display screen error messages