26
MAINTENANCE
WARNING:
Toavoid serious personal injury, always remove the battery pack from the mower before cleaning or
performing any maintenance.
WARNING:
Whenservicing,useonlyidenticalreplacementparts.Useofanyotherpartsmaycreateahazardor
cause product damage. To ensure safety and reliability, all repairs should be performed by a qualified service technician.
CLEANING THE MOWER
WARNING:
Always remove the battery pack when servicing or transporting the mower.
The underside of mower deck should be cleaned after each use, as grass clippings, leaves, dirt and other debris will
accumulate. This accumulation is undesirable, as it will promote rust and corrosion.
REMOVING THE BLADE
WARNING:
Always protect your hands by wearing heavy
glovesorwrappingthecuttingedgeswithragsorothermaterials
whenperforminganymaintenanceonthemowerblade.Always
removethebatterypackwhenservicingortransportingthe
mower.
NOTICE:
The following tools are required for replacing the blade:
◾
16mm wrench
◾
torque wrench
◾
Manual screwdriver or metal rod with a diameter of 5/16” (8mm)
1. Stop the motor; remove the battery pack from the mower.
2. Turn the mower on itsside.
3.
Whilewearingprotectivegloves,placeametalrod(e.g.,a
3.5”length screw bit) with diameter less than 5/16”(8mm)
into the fixing hole to act as a stabilizer (Fig. 17).
4. Usea inch(16mm)wrenchtoturnthebladebolt
counterclockwise to loosenit.
5.
Continueusingthe inch(16mm)wrenchtoturn
the
blade bolt counterclockwise to loosen it completely.
6. While wearing protective gloves, remove the bolt, outer
flange and the blade (Fig. 17).
Stabilizer
Loosen
17
