HENX A40LJ14B01 Скачать руководство пользователя страница 9

Страница: 9 / 77

DANGER:

People with electronic devices, such as pacemakers, should

consult their physician(s) before using this product. Operation of electrical

equipment in close proximity to a heart pacemaker could cause interference or

failure of the pacemaker.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING!

Read all safety warnings and instructions.

Failure to follow

the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated (corded)

power tool or battery-operated (cordless) power tool.

WORK AREA SAFETY

◾

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

◾

Do not operate power tools in explosive atmospheres

such as in the

presence of flammable liquids, gases or dust.

Power tools create sparks

which may ignite the dust or fumes.

◾

Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

ELECTRICAL SAFETY

◾

Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adaptor plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock

◾

Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators.

There is an increased risk of electric

shock if your body is earthed or grounded.

Содержание A40LJ14B01














































































Результаты поиска

Содержание A40LJ14B01

Отзывы:

Бренды по названию

Популярные бренды

HENX A40LJ14B01, Руководство оператора

Результаты поиска

Содержание A40LJ14B01

Отзывы:

Бренды по названию

Популярные бренды