HENX A40LJ14B01 Скачать руководство пользователя страница 12

Страница: 12 / 77

power tool’s operation. If damaged, have the power tool repaired before

use.

Many accidents are caused by poorly maintained power tools.

◾

Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

◾

Use the power tool, accessories and tool bits, etc. in accordance with

these instructions, taking into account the working conditions and the

work to be performed

. Use of the power tool for operations different from those

intended could result in a hazardous situation.

BATTERY TOOL USE AND CARE

◾

Recharge only with the charger specified by the manufacturer.

A charger

that is suitable for one type of battery pack may create a risk of fire when used

with another battery pack.

◾

Use battery operated chain saws only with specifically designated
battery packs.

Use of

any other battery packs may create a risk of injury

and fire.

◾

When the battery pack is not in use, keep it away from other metal

objects, like paper clips, coins, keys, nails, screws or other small metal

objects that can make a connection from one terminal to another.

Shorting the battery terminals together may cause burns or a fire.

◾

Under abusive conditions, liquid may be ejected from the battery;

avoid contact. If contact accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the

battery may cause irritation or burns.



Battery powered chain saws do not have to be plugged into an electrical

outlet; therefore, they are always in operating condition. Be aware of possible

hazards when not using your battery powered chain saws or when changing

accessories. Following this rule will reduce the risk of electric shock, fire, or

serious personal injury.



Do not charge the battery pack outdoors.

Содержание A40LJ14B01














































































Результаты поиска

Содержание A40LJ14B01

Отзывы:

Бренды по названию

Популярные бренды

HENX A40LJ14B01, Руководство оператора

Результаты поиска

Содержание A40LJ14B01

Отзывы:

Бренды по названию

Популярные бренды