User manual // Speed Max
HENSEL-VISIT GmbH & Co. KG
23
Radio Remote Control System freemask
Utilization
The Speed Max flash unit comes equipped with an
integrated, freemask-capable radio control receiver
compatible to the Hensel Strobe Wizard System. It is able
to receive the radio signals from the optional radio control
transmitter used to trigger flashes, to control the flash
power settings, and to set the modeling light into
FULL/PROP/OFF mode. Radio technology works around
corners, and it is immune to ambient light. The working
range is up to 40 m under line-of-sight conditions.
The radio transmitter is dedicated to the Hensel Strobe
Wizard System and may not be used for any other
application, especially not to control other electronic
devices or machines.
Using the radio remote control receiver and selecting
channels
The radio control receiver can be activated and set to the
selected working channel of the radio transmitter/sender
by pushing button
8
RC/CH. The pushbutton switch
8
serves a dual function:
Depressing it momentarily will activate the RC-
Function. This state is confirmed by the indicator
LED located above the button.
Depressing it for 2 seconds will activate the CH-
function (Channel Select) that allows selection of a
working channel (C1, C2, C3 und F1, F2, F3) by
turning the multifunctional control knob
4
. The
individual channel number will be shown in the small
green display above the ID button
7
for duration of 5
seconds. If no input takes place within that time the
display will automatically switch into standard state.
The last channel displayed will be stored in memory
and activated.
The Speed Max flash unit can now be selectively
addressed by the transmitter/sender unit. Setting the
transmitter to the "ALL" option makes every flash unit in
the system respond at the same time, independent from
its individual working channel.
8:
RC/CH
