User manual // Speed Max
10
HENSEL-VISIT GmbH & Co. KG
5
Control Panel Description
1
Release lever for reflector quick-change assembly
2
Display Flash Frequency (FLASH/s, 2 digits, red)
3
Display Flash Power (ENERGY, 2 digits, red)
4
Multifunctional control for Flash Energy and Frequency
selection, RC Radio Control Channel Selector, with
integrated pushbutton switch for selection of Frequency
and Power Priority Mode.
5
Photo Sensor (Slave Cell)
6
Display (2 digits, green) for ID-Number and selected
CH Radio Channel.
7
ID: Pushbutton switch for selecting an ID-Number for
RS485 Interface.
8
RC/CH: Pushbutton switch for (RC) radio control ON/
OFF, and (CH) radio channel selection. Separate
Indicator-LED.
9
FULL: Pushbutton switch with separate indicator-LED
to use the modeling light at maximum brightness.
10
PROP: Pushbutton switch for the modeling light. When
activated, the brightness will be proportional to the flash
power setting.
11
AUDIO: Pushbutton switch for turning the acoustical
ready indicator ON/OFF
12
SLAVE: Pushbutton for switching the photo sensor
(slave cell) ON/OFF
13
FC: Flash Check ON/OFF
14
TEST: Pushbutton for manually triggering flashes
15
Flash Ready indicator with big green LED.
16
ON/OFF: Mains supply switch
17
Mains supply socket with integrated fuse holder
18
Fuse 20mm 2 AF (230V/50Hz) or 4 AF (115V/60Hz)
19
Spare Fuse
20
USB: socket for programming with a computer.
21
TTL: socket for triggering flashes by means of a TTL-
signal ( transistor-transistor-logic, +5V)
22
RS485: socket of the RS485 interface
23
SYNC: jack for sync cable with 6.3 mm plug
24
Umbrella holder with quick clamping mechanism
