Hensel Porty L120, Руководство пользователя

Страница: 35 / 52

User Manual Porty L
35 HENSEL-VISIT GmbH & Co. KG
Â
Set the channel selection switch F5 to channel 1, 2 or 3 for
synchronizing individual channels
- or -
Â
Select the switch position ALL when all channels are to be
controlled.
Setting receiver
The key RC/CH 17 on the flash head is used to activate the radio
receiver and to set the channel.
Â
Briefly press the RC/CH key 17 to switch on the radio mode.
The display 19 shows „C1“for channel 1 of Strobe Wizard
Plus. The LED above the key lights up green.
Â
Press the key RC/CH 17 for ca. 2s to switch the channels of the
radio receiver.
The display 19 is blinking. The control keys t , tt 16 and
uu
,
u
11 allow you to switch between the channels.
After the channel „C1“come the channels „C2“and „C3“of
Strobe Wizard Plus, directly behind them the channels „F1“,
„F2“and „F3“ of the freemask receiver.
Approximately 3s after a key was last pressed, the channel is
saved and the display 19 stops blinking.
Output adjustment
The flash output is adjusted in steps of 0.1 f-stops with the two
control keys
q
F1 and
p
F2 on the generator
Â
Briefly press
q
to reduce the output
Â
Briefly press p to increase the output
The generator’s LED display shows the selected output values.
Switching radio
receiver on/off
Selecting radio
channel