User manual // Expert / Integra Pro (Plus)
18
HENSEL-VISIT International GmbH
It is also possible to reduce the stored energy by simply
triggering a TEST flash by pressing button
6
.
Modeling lamp
The operation mode for the modeling light can be
selected by pressing the buttons
11
or
12
. By pressing
the FULL button
11,
the maximum modeling light output
is set. By pressing the PROP button
12
, the modeling
light output is proportional to the selected flash power.
When the flash power is reduced, the modeling light
output will be reduced by the same increments. The
selected operation mode for the modeling lamp is
indicated by the respective ON indicator. The modeling
lamp is switched OFF when no ON indicator lights up.
Dim mode
The dim mode is intended to prolong the life span of the
modeling lamp. If the modeling lamp level is adjusted to
FULL or to PROP between 10.0 and 9.1, the output is
dimmed automatically by approximately 1 f-stop after
having stopped working with the flash unit for longer
than 35 minutes (default value). Pressing any button
you like switches the modeling light to the previously
adjusted un-dimmed level. If required, this default value
can be changed by entering a value from 5 minutes up
to 95 minutes. For this purpose press button
13
twice
and enter the new value shown on display
14
. Wait for
3 seconds and the display changes to the flash power
setting.
Flash Check
If this mode is switched on by pressing the FC button
4
,
the modeling lamp is turned off after a flash and will
turn on after recharging to the adjusted power level.
This shows correct charge as well as readiness to
flash. The flash check mode guarantees that the flash
heads have triggered when more than one flash unit is
used.
Flash counter
The data is read out of the flash counter by pressing
the AUDIO button
3
for approximately 3 seconds. the
number of flashes triggered appears on the LED
display
14
as a two-digit number:
6:
TEST
11, 12:
FULL
PROP
4:
FC
13, 14
3:
AUDIO
14
Содержание Expert Pro
