Hensel Expert Pro, Руководство пользователя

Страница: 23 / 30

User manual // Expert / Integra Pro (Plus)
HENSEL-VISIT International GmbH
23
The FREEMASK application for the second group of
flash units does not allow you to switch the modelling
light or the flash power via radio remote. You can only
use the channels F1, F2, and F3 to differentiate
between up to three different, separate work stations.
Channel selection for one work station:
Please set all flash units used to light the set to C-
channels in order to trigger the automatic, synchronized
flashing of these units when using the FREEMASK
application. The FREEMASK compact flash units used
for lighting the mask have to be set on channels F1, or
F2, or F3. The slave of the FREEMASK compact flash
units must be turned off to avoid their triggering by the
first flash group. The slaves of all other flash units can
be turned on. Exclusion: SPEED MAX. They offer too
short recycling times.
The Free mask transmitter can be set to channel ALL.
Channel selection for several work stations:
If several, separate work stations are set up within the
range of the radio remote control, the following
configurations can be selected: matching channels
have to be assigned to all flash units of both work
groups and of the FREEMASK transmitter (e.g. C1 +
F1 for work station 1, and C2 + F2 for work station 2,
and C3 + F3 for work station 3).
Camera settings:
If your camera supports these settings, use the
following settings for the FREEMASK application:
1. Speed of picture series to fastest setting.
2. Number of exposures to two.
This ensures the setting to highest picture frequency
with two succeeding exposures (depending on
camera).
The transmitter will then trigger the flash group 1 (C1,
C2, and C3) for the set lighting and the flash group 2
(F1, F2, and F3) for the mask lighting, during the two
camera exposures.
At present, all cameras are supported with picture
series speeds from 3 pictures per second to (in theory)
500 pictures per second.