User manual // EH Pro Head
HENSEL-VISIT GmbH & Co. KG
25
Do not route cables across the studio floor if possible, so
that damage is excluded. If routing across the studio floor
cannot be omitted, then it must be ensured that vehicles,
ladders, etc. do not damage cables. Damaged cables and
cases must be replaced immediately by customer service.
Do not stick any objects into ventilation slots. Ventilation
slots of the flash head must be kept free during operation,
and sufficient air supply must be ensured. Do not deposit
any objects (tools, coffee cups, etc.) on the flash head.
Flash systems must not be used in environments with
explosion hazard. Flammable materials, like furnishing
fabrics, paper, etc. must not be stored in the immediate
vicinity of flash heads to prevent fire hazards.
Flash heads must be protected against humidity and spray
water.
Do not connect accessories from other manufacturers,
even if they use the same or similar connectors.
Flash heads - hanging from pantographs or ceiling
– must
be doubly secured against falling down.
Do not flash into eyes at short distances (smaller than
5 m ), because this can lead to eye damage.
Do not look directly into the flash reflector, the flash lamp
could be triggered inadvertently.
Regularly air closed rooms to prevent build-up of inad-
missible ozone concentrations, which can occur due to the
use of high-powered flash systems.
During work in the studio generating much dust, the
appliance must be covered with suitable dust protection
(not during operation).
