www.saxbylighting.com
Instruction manual
91954, 91955, 91956
Hades
Technical data
220-240 V~, 50 Hz
Supply
Voltage:
Bulb
Type:
91954--------1.2W LED module (SMD), 3000K
91955--------1.2W LED module (SMD), 4000K
91956--------1.2W LED module (SMD), Blue
The power supply is Double Insulated and does not require connection to an Earth circuit.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
Having correctly identified the wiring from your existing light fitting, connect to the approved IP67 (or higher rated) terminal
block in the following way (recommended terminal block Ref. 90131/90132)
Wiring
You have correctly identified the wires.
The connections are tight.
No loose strands have been left out of the
connection block.
Check that...
Conformity with all relevant EC Directive requirements.
Conformity with all relevant UKCA Directive requirements.
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
For your safety, always switch off the power supply before changing lightbulbs, or cleaning.
Care and Safety
Replace Cracked Shade
The LED's are protected by a plastic lens. The lens part must be replaced immediately should
it become cracked or damaged. This fitting must not be used without the plastic lens in place.
This product is rated at IP67.
IP
67
This product is not suitable for dimming.
NEUTRAL
SWITCHED LIVE
BLUE (N)
BROWN (L)
SUPPLY
LIGHT FITTING
For further information, please visit
https://www.lighting-info.co.uk/91954
Non-replaceable control gear
Non-replaceable light source
Except the 91956, these products contain a light source of energy efficiency class
G
.
V2 28/11/2021
EU Manufacturer: Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
UK Manufacturer: BH17 7BY
