Model OFE/OFG/OEA/OGA-341, 342
3-7. BASIC OPERATIONS
AND
PROCEDURES-
(12 Button Controls/Autolift)
To load product directly into the shortening on Auto-lift
(Continued)
fryers, lower empty basket(s) into the shortening by
pressing , load with product, then press
the product button to start the Cook Cycle.
Raise the basket(s) on Auto-lift fryers anytime during a
Cook Cycle by pressing
. The Timed Cycle
then
pauses.
10. At the end of the Cook Cycle, a tone sounds and the
display shows “DONE”. Lift the basket from the
shortening. (On auto-lift fryers, the basket(s)
automatically rises out of the shortening.) To stop the
“DONE” beeper, press either
, or
the product button.
A different product can be selected during the first
minute of cooking, in case the wrong product button
was
pressed.
11. The display shows either dashes, or the product name,
depending on the Special Program setting, SP-10. If a
Quality Time was programmed, the controller
alternately shows the product selected and the Quality
Time remaining in minutes. If a different product is
selected during the Hold Cycle, the display only
shows
the
product
selected.
12. At the end of the Hold Cycle, a tone sounds, the
display flashes “QUALITY”, and the product it was
timing. Press and release .
In the Cook Mode, when "FILTER SUGGESTED,
shows in the display, the operator has the option to
filter at this time, or to continue cooking. But, if the
operator continues cooking, a filter lockout will occur
within the next Cook Cycle, or two.
When
"FILTER LOCKOUT"
, then
"YOU *MUST*
FILTER
NOW........”
shows in the display, is the only
button that functions, until the unit is filtered.
3-12
903
