Henny Penny OEA Скачать руководство пользователя страница 1

 Model OFE/OFG/OEA/OGA-341, 342 

 
 

 

 

 

 

 

 

 

 

 

 

 

3-1. OPERATING COMPONENTS

 

Reference Figure 3-1. 

 C1000 

CONTROLS 

 

 

Fig. 

Item  Description   

 

  Function

 

No. No.

 

3-1 

Digital Display 

Shows the shortening temperature, the timer countdown in 

 

 

 

the Cook Cycle, and the selections in the Program Mode; the  

 

 

 

temperature of the shortening can be shown by pressing  

 

 

 

once, or twice to view set-point temperature; 

 

 

 

if shortening temperature exceeds 425

°

F (218

°

C), the display 

 

 

 

reads “E-5, FRYER TOO HOT”   

 
3-1 

 

This LED lights when the shortening temperature is within 5

°

 

 

 

 

of the setpoint temperature, signaling the operator that the  

 

 

 

 

shortening temperature is now at the proper temperature for    

 

 

 

dropping product into the frypot 

 

 

 

3-1 

The timer buttons are used to start and stop Cook Cycles 

 
 
 
3-1 

 

The idle buttons are used to start an Idle Mode which reduces 

 

 

 

the temperature of the shortening during non-use periods;  

 

 

 

press and hold to exit the Idle Mode    

 
 
3-1 

 

The program button is used to access the Program Modes;  

 

 

 

also, once in the Program Mode, it is used to advance to the  

  

 

next 

parameter 

 
 
3-1 

6 & 7 

 

Used to adjust the value of the currently displayed setting 

 

 

 

 

in the Program Mode and to change set-point temperature for 

 

 

 

the left frypot, or basket 

  

 

 

 

 

3-1 

8 & 9 

 

Used to adjust the value of the currently displayed setting 

 

 

 

 

in the Program Mode and to change set-point temperature for 

 

 

 

the right frypot, or basket 

 

 

 

 

 

 

   

 

 

 

 

 

Proceed onto Section 3-3, Filling or Adding Shortening 

 
408 

 

 

 

 

 

 

 

 

 

 

 

                    3-1

SECTION 3.  OPERATION

 

Содержание OEA























Отзывы: