Henny Penny MVE-071 Скачать руководство пользователя страница 40

Страница: 40 / 56

July 2014

This feature allows the controls to be set for periods of the day that

block the automatic “Filter Now” prompts. For example, the controls

could be set to not interrupt with “Filter Now” prompts during the lunch

rush, and during the supper rush.

Each AIF Blocking period is defined by a start time (a time of day,

XX:XX A, etc) and a duration in minutes.

Weekdays M-F are all grouped together. Up to four different AIF

blocking periods may be programmed throughout the day for Monday -

Friday. (All days share the same settings.)

A separate set of four blocking periods may be programmed for Satur-

days, and a final set of four blocking periods may be programmed for

Sundays.

Press and hold

and

buttons until LEVEL - 1 shows in the

display, followed by ENTER CODE.

Enter code 1, 2, 3, 4 (first 4 product buttons). “PRODUCT” and

“SELECTN” show in the displays.

Press ▼ button once and “AIF CLOCK” show in the

displays.

Press

√

button and use ◄ and ► buttons to scroll through

“ENABLE” and “DISABLE” and then press

√

button again to

select one.

If “ENABLE” is chosen, then ▲ and ▼ buttons can be use to

scroll

through the following list of blocking periods:

Left Display

Right Display

M-F 1

XX:XX A XX

M-F 2

XX:XX A XX

M-F 3

XX:XX A XX

M-F 4

XX:XX A XX

SAT 1

XX:XX A XX

SAT 2

XX:XX A XX

SAT 3

XX:XX A XX

SAT 4

XX:XX A XX

SUN 1

XX:XX A XX

SUN 2

XX:XX A XX

SUN 3

XX:XX A XX

SUN 4

XX:XX A XX

4-2.

AIF CLOCK

Содержание MVE-071

























































Результаты поиска

Содержание MVE-071

Отзывы:

Henny Penny MVE-071, Руководство оператора, Страница: 40 / 56

Результаты поиска

Содержание MVE-071

Отзывы: