Henny Penny LVG-202, Техническое руководство, Страница: 28 / 174

Level
2
Programming
20
NOTE:
• Use the up arrow button to go back to previous menu items.
• Press “X” button when finished with the current product, to return to the PRODUCT
SELECTN step.
• Press “X” button a second time to exit PROD COMP mode.
5 5..2 2 E E--L LO OG G ((E Errrro orr C Co od de e L Lo og g))
1 1))
Press and hold the temp and info buttons until “LEVEL - 2” shows in the display,
followed by “ENTER CODE”.
2 2))
Enter code 1, 2, 3, 4 (first 4 product buttons). “PROD” and “COMP” show in the
displays.
3 3))
Press the down arrow and “E-LOG” shows in the display.
4 4))
Press right “✓” button and “A” plus the present date & time flashes on the
display, along with “*NOW*”.
5 5))
Press the down arrow and if an error was recorded, “B” and the date, time, and
error code information shows in display. This is the latest error code that the
controls recorded.
6 6))
Press the down arrow and the net latest error code information can be seen. Up
to 10 error codes (B to K) can be stored in the E-Log Section.
NOTE: Press and hold the right “✓” button to view a brief description of the error.
5 5..3 3 P Pa assssw wo orrd dss
The 4-digit passwords can be changed for access to Set-Up, Usage, Level 1, Level 2,
& Get Mgr.)
1 1))
Press and hold the temp and info buttons until “LEVEL - 2” shows in the display,
followed by “ENTER CODE”.
2 2))
Enter code 1, 2, 3, 4 (first 4 product buttons). “PROD” and “COMP” show in the
displays.
3 3))
Press the down arrow twice and “PASSWORD” shows in the display.
4 4))
Press right “✓” button and “SET UP” shows in display. The set-up password can
be changed at this time, or press the down arrow once to change the “USAGE”
password, twice for “LEVEL 1” password, 3 times for “LEVEL 2” password, or 4
times for “GET MGR” password. And then, follow instructions below.
5 5))
If the password for the Set-Up Mode (for example) is to be changed, press right
“✓” button and “MODIFY?” “YES NO” shows in the display. Press right “✓”
button to change the 4-digit password for the Set-Up Mode, using the product
buttons.
6 6))
Once new password is entered, “CONFIRM PASSWORD” shows in the display.
Press “✓” button to confirm, or press “X” to choose another password.