Henny Penny LVG-202, Техническое руководство

Страница: 11 / 174

T
roubleshooting
3
Problem Cause Correction
Filter Pan needs
cleaned. Clean filter pan and change pad.
JIB is low or
empty. Fill the JIB.
JIB oil line is
clogged or
collapsed. Check JIB line.
Quick disconnect
O-ring may be
worn or missing. Check JIB disconnect O-ring for wear or cracking. Re-
place if missing or torn.
Bubbles in
oil during
entire filter-
ing
process. Filter pan needs
cleaned. Clean filter pan and change pad.
Filter pan not
completely
engaged. Make sure filter pan return line is pushed completely into
the receiver on the fryer.
Filter pan
clogged. Clean pan and change pad.
Damaged O-ring
on filter line re-
ceiver on fryer. Change O-ring.
Filter motor
runs but
pumps oil
slowly. Filter line connec-
tions loose. Tighten all filter line connections.
Drain pan O-rings
damaged or
missing. Install new O-rings.
Filter paper or
pad clogged. Change filter paper or pad.
Filter motor
will not run. The thermal reset
button on the rear
of the pump mo-
tor is tripped.
• Allow time for the motor to cool. Open front door and
using at least a 12 inch crosshead screwdriver, press
on the thermal reset button by prying hard between
the button and the door frame until button clicks.
T TU UR RN N O OF FF F P PO OW WE ER R T To o p prre evve en ntt b bu urrn nss cca au usse ed d b byy
ssp plla assh hiin ng g ssh ho orrtte en niin ng g,, ttu urrn n tth he e u un niitt’’ss p po ow we err ssw wiittcch h
tto o tth he e o offff p po ossiittiio on n b be effo orre e rre esse ettttiin ng g tth he e ffiilltte err p pu um mp p
m mo otto orr’’ss m ma an nu ua all rre esse ett p prro otte eccttiio on n d de evviicce e..
• Check motor and relay.