manualshive.com logo in svg

Henny Penny GVE-071, Руководство оператора

Поделиться
Скачать
Henny Penny GVE-071 Скачать руководство пользователя страница 22

1

5

July 2014

3-4

MORNING START-UP 

PROCEDURES

1.

Make sure vat is filled with oil to the proper level.

2.

 Move power switch to the ON position and then press 

 to turn

on heat for the desired vat. If display shows “IS POT FILLED?”

make sure oil is at the proper level (see Section 3-3) and then press

√

button for “YES”.

Unit automatically goes into the Melt Cycle until the oil temperature 

reaches 180°F (82°C) and then control automatically exits the Melt 

Cycle.

The Melt Cycle may be bypassed, if desired, by pressing 

√

 button or X button 

and holding it for 5 seconds.

The control then shows “EXIT MELT” “YES NO”. Press 

√

 button for “YES” 

and vat heats continuously until the set-point temperature is reached.

Do not bypass the Melt Cycle unless enough oil has melted to completely cover 

all of the elements. If the Melt Cycle is bypassed before all elements are cov-

ered, excessive smoking of oil, or a fire will result.

DO NOT OVERLOAD, OR PLACE PRODUCT WITH EXTREME 

MOISTURE CONTENT INTO THE BASKETS. 3 LBS. (1.4 KG.) IS 

THE MAXIMUM AMOUNT OF PRODUCT PER FULL VAT AND 1-1/2 

LBS. (.68 KG.) FOR THE SPLIT VATS. FAILURE TO FOLLOW THESE 

INSTRUCTIONS CAN RESULT IN OIL OVERFLOWING THE VAT 

WHICH COULD CAUSE SERIOUS BURNS, PERSONAL INJURY, 

FIRE AND/OR PROPERTY DAMAGE.

Содержание GVE-071
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды